FRICHOC FCH50 + B300/B400

The FRICHOC FCH50 + B300/B400 combines a 50-litre chocolate melting machine with a B300 or B400 enrobing machine to work continuously in melting, thermal maintenance, enrobing and chocolate coating processes. The 50 liter capacity and the name FCH50+B300/B400 are confirmed in the current Mainco catalog.

Chocolate Melter and Enrober for Professional Production

The Frichoc FCH50 + B300/B400 combines a 50-litre chocolate melter with a B300 or B400 enrober. It is designed for continuous processing of chocolate, coatings and enrobing applications, maintaining stable product temperatures and allowing precise process adjustment.

Stable Water-Bath Heating

The heating system uses food-grade glycol in a sealed, closed-loop water-bath circuit. An armoured heating element immersed in a stainless-steel boiler transfers heat to the tank jacket and the jacket surrounding the feed screw cylinder. The FCH50 has a heating power of 3,500 W, helping the machine recover its operating temperature quickly during production.

Continuous Pumping and Chocolate Flow Control

Chocolate is continuously conveyed by a water-jacketed helical screw, with a flow rate currently specified by Mainco at 8–9 Kg per minute. The system supplies chocolate to curtain enrobing machines up to 400 mm wide. The screw speed can be adjusted electronically from the control panel, allowing operators to regulate the amount of chocolate delivered during the process.

Adjustable Enrobing and Finish Control

The enrober’s infeed can be stopped or activated via a clutch to make product positioning easier. The central section features a hopper with two adjustable gates for top coating and a selectable lower enrobing tray. The machine also features an adjustable mechanical vibration system to remove excess chocolate evenly, along with an air blower with adjustable height, direction and airflow.

Cleaning and Maintenance

The drive unit is housed within the enrober and incorporates clutch mechanisms to prevent damage to the conveyor belt if it jams due to hardened chocolate. The enrober features an AISI 304 stainless-steel wire conveyor belt and is designed to be removed from the machine without tools. As the enrobing unit contains no electrical components, it can be cleaned in a dishwasher, simplifying daily cleaning and maintenance.

Model Frichoc fch50 + b300/b400
Range Frichoc chocolate melting and enrobing machines
Capacity 50 liters
Machine type Chocolate melter with B300 or B400 enrober
Main functions Cast, thermal maintenance, pumping, dosing, enrobing and chocolate covering
Heating system Heating by glycol food to bath in watertight closed circuit
Heating equipment Total circuit in a bain-marie by means of armoured heating element in stainless steel boiler
Heat input Heat applied to the tank jacket and to the sleeve of the feeder spindle cylinder; worktop of the enrobing machine heated by hot water
Heating power 3,500 W
Enrober B300 or b400
Chocolate pumping Helical spindle heated to a bain-marie; continuous movement of 8/9 Kg per minute
Chocolate curtain Product availability for curtains up to 400 mm wide
Flow regulation Electronic spindle speed control from the control panel
Spindle control Variation of frequency on asynchronous three-phase motor, with disconnection in case of overloads or incidents
Tank agitation Agitator driven by three-phase motor at continuous fixed speed and protected by thermal relay
Stirring safety Safety thermostat regulated at 35 °C to prevent agitation before reaching the minimum melting temperature
Enrober infeed Clutch activation or stopping to facilitate the correct placement of the product
Top coating Hopper with two adjustable gates
Bottom coating Selectable enrobing bottom tray
Vibration Adjustable mechanical vibration system to remove excess chocolate
Blower Height adjustable air blower, orientation and flow
Electrical equipment Front emergency electrical disconnector and rear electrical panel with protective magneto-thermals
Enrobing construction AISI 304 stainless steel wire conveyor belt, stainless steel guide bars and anodized aluminum plates
Enrober Safety integrated drive unit with clutch mechanisms to prevent damage if the mechanism jams.
Cleaning Enrober removable without tools
Applications Chocolate dipped, toppings, icing and pastry and chocolate finishes

Frichoc TCH 3M

The Frichoc TCH 3M integrates controlled chocolate cooling into the production line after enrobing, with conveyor speed adjusted to suit the production process.

Frichoc TCH9

The Frichoc TCH9 allows chocolate to be processed with precise temperature control and a professional configuration for tempering, dosing and enrobing when combined with the appropriate equipment.

Frichoc FCH20 + B180

The Frichoc FCH20 + B180 combines a chocolate melter with a B180 enrober, enabling continuous processing for chocolate coatings, enrobing and finishing in professional chocolate-making and pastry applications.

Frichoc GR20

The FRICHOC GR20 is designed for chocolate and confectionery, with a compact solution for professional coatings and finishes.

Frichoc TCH20 + B180

The Frichoc TCH20 + B180 provides temperature-controlled chocolate tempering and dosing. The accompanying enrober coats products with chocolate.

Frichoc FCH30 + B240

The FRICHOC FCH30 + B240 combines a chocolate melter with a B240 enrober, enabling continuous processing for chocolate coatings, enrobing and finishing in professional chocolate-making and pastry applications.