Frichoc FCH30 + B240

The FRICHOC FCH30 + B240 combines a chocolate melter with a B240 enrober, enabling continuous processing for chocolate coatings, enrobing and finishing in professional chocolate-making and pastry applications.

Melting and chocolate enrobing machine with a Heating via a sealed, closed-loop jacketed system.

The Frichoc FCH30 + B240 is a chocolate melter and enrober for professional production. It uses indirect water-bath heating in a sealed, closed circuit, with hot water transferring heat to the tank jacket, the jacket around the feed screw cylinder and the enrober worktop.

Stable heating and fast temperature recovery

The equipment incorporates a large heating power of 3000 watts, which favors a rapid recovery of temperature during work. The heating is carried out by means of a total circuit in the bain-marie, with armored resistance submerged in a stainless steel boiler, providing heat to both the tank jacket and the case of the feeder spindle cylinder.

Continuous pumping and control of chocolate flow

The continuous movement of the chocolate is carried out by means of a helical spindle heated in a water bath, with a flow of 8/9 kg per minute. This system maintains the uniformity of the product and allows to work with curtain enrobing machines up to 400 mm wide. From the control panel, the user can regulate the amount of chocolate provided at each moment.

B240 Enrober with Three Working Zones

The B240 enrobing belt has three work zones: entrance, central zone and exit. Its speed can be regulated by electronic variator, adapting the pace of production to the available personnel and the type of part or product that is being worked on.

Agitation, safety and accessible maintenance

The agitation of the tank is carried out by three-phase motor at a continuous fixed speed, protected by thermal relay. The system incorporates a safety thermostat regulated at 35 ºC to prevent stirring from starting before reaching the minimum melting temperature. The rear electrical panel centralizes inverter, contactors and magnetothermals, facilitating access for maintenance.

Quick Enrober Cleaning

The enrober is designed for easy disassembly, both between its modules and from the main machine. As the enrobing unit contains no electrical components, it can be dismantled without tools and cleaned in a dishwasher, simplifying daily maintenance and product changeovers.

Model FRICHOC FCH30 + B240
RANGE Frichoc Chocolate Melting and Enrobing Machines
Machine type Chocolate melter with B240 enrober
Main functions Cast, thermal maintenance, pumping, dosing, enrobing and chocolate covering
Heating system Heating to the water bath in closed circuit watertight
Heating equipment Total circuit in a bain-marie for armoured heating element submerged in stainless steel boiler
Heat input Heat applied to the tank jacket, to the packing of the feeder spindle cylinder and to the worktop of the enrobing machine by means of hot water
Heating power 3000 Watts
B240 Enrober Enrobing tape with 3 work zones: entrance, central and exit
Tape speed Adjustable by electronic variator according to personnel and product worked
Chocolate pumping Helical spindle heated to a bain-marie; Continuous movement of 8/9 Kg per minute
Chocolate curtain Suitable for curtain chocolate enrobing machines up to 400 mm wide.
Flow regulation Electronic spindle speed control from the control panel
Spindle control Variation of frequency on asynchronous three-phase motor, with disconnection in case of overloads or incidents
Tank Agitation Stirrer commanded by three-phase motor at continuous fixed speed and protected by thermal relay
Stirring safety Safety thermostat regulated at 35 °C to prevent agitation until the minimum melting temperature exceeds
Electrical equipment Front emergency electrical disconnector and rear electrical panel with protective magneto-thermals
Electrical maintenance Electrical panel with drive, contactors and centralized components for easy maintenance access
Enrobing construction AISI 304 stainless steel wire conveyor belt, same material guide bars and anodized aluminum plates
Enrober Safety Drive unit housed within the enrober, with clutch mechanisms to prevent damage from mechanical seizure
Cleaning Tool-Free Removable Enrober with No Electrical Components, Dishwasher-Safe for Easy Cleaning
Applications Chocolate dipped, toppings, icing and pastry and chocolate finishes

Frichoc TCH 3M

The Frichoc TCH 3M integrates controlled chocolate cooling into the production line after enrobing, with conveyor speed adjusted to suit the production process.

Frichoc TCH9

The Frichoc TCH9 allows chocolate to be processed with precise temperature control and a professional configuration for tempering, dosing and enrobing when combined with the appropriate equipment.

Frichoc FCH20 + B180

The Frichoc FCH20 + B180 combines a chocolate melter with a B180 enrober, enabling continuous processing for chocolate coatings, enrobing and finishing in professional chocolate-making and pastry applications.

Frichoc GR20

The FRICHOC GR20 is designed for chocolate and confectionery, with a compact solution for professional coatings and finishes.

Frichoc TCH20 + B180

The Frichoc TCH20 + B180 provides temperature-controlled chocolate tempering and dosing. The accompanying enrober coats products with chocolate.

Frichoc TCH30 + B240

The Frichoc TCH30 + B240 provides temperature-controlled chocolate tempering and dosing. The accompanying enrober coats products with chocolate

Frichoc: Refrigerated tunnel for chocolate

Frichoc C40: Bean-to-Bar Chocolate Conching Machine

Frichoc TCH45: Chocolate Tempering Machine

Frichoc TCH30: Chocolate Tempering Machine with Mould Doser